Chapter 2 Avaya P460 CLI Commands

necessary.

Use the ip access-list-copycommand to copy a configured source policy list to a destination policy list.

The syntax for this command is:

ip access-list-copy<source-list> <destination-list>

<source-list>

integer (100...

199)

<destination-list>

integer (100...

199)

Example:

Router-1(configure)#ip access-list-copy 100 101

ip access-list-name

User level: read-write, admin.

You can only access this command in Configure mode.

Type configure at the command prompt to enter Configure mode if necessary.

Use the ip access-list-namecommand to set a name for a policy list.

The syntax for this command is:

ip access-list-name<policy-list-number> <name>

<policy-list-number>

integer (100...199)

<name>

list name

Example:

 

Router-1(configure)#ip access-list-name 101 morning

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

ip access-list-owner

User level: read-write, admin.

You can only access this command in Configure mode.

Type configure at the command prompt to enter Configure mode if

34

Avaya P460 Reference Guide

Page 44
Image 44
Cambridge SoundWorks P460 manual Router-1configure#ip access-list-copy 100, Ip access-list-name, Ip access-list-owner