Chapter 2 Avaya P460 CLI Commands
Example:
P460-1> show ppp authentication
PPPAuthentication Parameters:
Incoming: CHAP
show ppp baud-rate
User level: read-only, read-write, admin.
Use the show ppp
The syntax for this command is:
show ppp baud-rate
Example:
P460-1> show ppp baud-rate
PPP baud rate is 38400
show ppp configuration
User level: read-only, read-write, admin.
Use the show ppp configuration command to display the ppp configuration.
The syntax for this command is:
show ppp configuration
Example:
P460-1> show ppp configuration
PPP baud rate is 38400
PPPincoming timeout is 15 minutes PPP Authentication Parameters:
Incoming: None
show ppp incoming timeout
User level: read-only, read-write, admin.
Use this show ppp incoming timeout command to display the amount of time
Avaya P460 Reference Guide | 165 |