
Chapter 2 Avaya P460 CLI Commands
Example:
This command may overwrite the neighbor SPV software and reset it
***Confirmation *** - do you want to continue (Y/N)? y Copying Bank A to the neighbor SPV ...
Copying Bank A to the neighbor SPV done Copying Bank B to the neighbor SPV ...
Copying Bank B to the neighbor SPV done
Copying Embedded Web image to the neighbor SPV ...
Copying Embedded Web image to the neighbor SPV done Setting boot bank of the neighbor SPV ...
Setting boot bank of the neighbor SPV done Setting chassis sync on for the neighbor SPV...
Setting chassis sync on for the neighbor SPV done SPVs are resetting.
Please wait till the process is finished. The SPVs will be synchronized after the reset is completed
The configuration is synchronized after you perform a reset.
sync time
User level: read-write, admin.
Use the sync time command to synchronize the time used by all modules in the switch.
The syntax for this command is:
sync time Example:
P460-1# sync time
Time has been distributed.
tech
Use the tech command to enter tech mode. This command is reserved for service personnel use only.
182 | Avaya P460 Reference Guide |