Cambridge SoundWorks P460 Show port classification module/port, Show port flowcontrol module/port

Chapter 2 Avaya P460 CLI Commands

show port classification

User level: read-write, admin.

Use the show port classification command to display a port’s classification.

The syntax for this command is:

show port classification [module/[port]]

module	Number of the module (3-6). If you do not specify a
	number, the ports on all the modules are shown.
port	Number of the port on the module. If you do not
(Optional)	specify a number, all the ports on the module are
	shown.
	You can also specify a range of ports separated by a
	dash, for example, 4/5-13 for ports 5 to 13 on
	module 4.
Example:

P460-1>show port classification 4/8

Port	Port Classification
------	---------------------
4/8	regular

P460-1>show port classification 4/9 Port Port Classification

------ ---------------------

4/9 valuable

show port flowcontrol

User level: read-only, read-write, admin.

Use the show port flowcontrol command to display per-port status information related to flow control.

The syntax for this command is:

show port flowcontrol [<module>[/<port>]]

module	Number of the module (3-6). If you do not specify a number, all
(Optional)	modules are shown.

160 Avaya P460 Reference Guide