Cambridge SoundWorks P460 manual Set port mirror

Chapter 2 Avaya P460 CLI Commands

set port mirror

User level: read-write, admin.

Use the set port mirror command to define a port mirroring pair in the switch.

The syntax for this command is:

set port mirror source-port <module>/<port> mirror-port <module>/

<port> direction {rxboth}

module	Number of the module (3-6). If you do not specify a number, the
	ports on all the modules are shown.
port	Number of the port on the module. If you do not specify a number,
	all the ports on the module are shown.
always	Keyword to activate the port mirroring entry
disable	Keyword to change the status of the port mirroring entry to “not
	active”
rx	Keyword to copy only incoming traffic
both	Keyword to copy both incoming and outgoing traffic
Example:

P460-1#set port mirror source-port 3/9 mirror-port 4/10

direction both

Mirroring both Rx and Tx packets from port 3/9 to port 4/10 is enabled

92 Avaya P460 Reference Guide