Chapter 2 Avaya P460 CLI Commands

Type router ospf at the command prompt to enter Router -OSPF mode if necessary.

Use the network command to enable OSPF in this network.

Use the no network command to disable OSPF in this network.

The default is disabled.

The syntax for this command is:

network <net addr> [<wildcard-mask> [area <area id>]]

net addr

IP address

wildcard-mask

Wildcard mask address

area id

Area ID. This parameter exists for compatibility with

 

P550.

Example:

 

Router-1 (configure router:ospf) # network 192.168.0.0

Router-1 (configure router:ospf) # area 192.168.0.0

0.0.255.255 area 0.0.0.0

no rmon alarm

User level: read-write, admin.

Use the no rmon history command to delete an existing RMON alarm entry.

The syntax for this command is:

no rmon alarm <Alarm Index>

Alarm Index

History index defined using rmon alarm command or P460

 

Manager.

P460-1#no rmon alarm 1026

60

Avaya P460 Reference Guide

Page 70
Image 70
Cambridge SoundWorks manual Area, No rmon alarm Alarm Index, P460-1#no rmon alarm