Chapter 2 Avaya P460 CLI Commands

set vlan (Layer 3)

User level: read-write, admin.

You can only access this command in Configure mode.

Type configure at the command prompt to enter Configure mode if necessary.

Use the set vlan command to create a router Layer 2 interface.

The syntax for this command is:

set vlan <vlan-id> name <vlan-name>

vlan-id

Interface Index

vlan-name

Interface name (used in layer 3 protocols)

Example:

 

Router-1(configure)# set vlan 2 name vlan2

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

set web aux-files-url

User level: read-write, admin.

Use the set web aux-files-urlcommand to allow the Device Manager to automatically locate the URL of the Web server containing the Device Manager help files and Java plug-in.

Tip: Ensure that the Web server is always accessible to prevent potential delays to Web access to the device.

The syntax for this command is:

set web aux-files-url<//IP address/directory name>

Example:

P460-1# set web aux-files-url //192.168.47.25/emweb-aux- files

If you wish to define a directory name which includes spaces, you must enclose the

118

Avaya P460 Reference Guide

Page 128
Image 128
Cambridge SoundWorks P460 manual Set vlan Layer, Set web aux-files-url