Chapter 2 Avaya P460 CLI Commands
settings.
The syntax for this command is:
show broadcast storm control
Example:
P460-1> show broadcast storm control
Broadcast Threshold Storm Control
disable500
show cam
User level: read-only, read-write, admin.
Use the show cam command to display the CAM table entries for a specific module and port.
Note: MACs associated with LAGs appear under the LAG ID, not under the LAG port.
By Module and Port
The syntax for this command is:
show cam [module[/port]]
MAC address | |
module | Number of the module |
(Optional) | modules are shown. |
port | Number of the port on the module. If you do not specify a |
(Optional) | number, all ports on the specified module are shown. |
122 | Avaya P460 Reference Guide |
