Chapter 2 Avaya P460 CLI Commands

To restore the maximum number of ARP cache entries to its default:

Router-1(configure)# no ip max-arp-entries

ip max-route-entries

User level: read-write, admin.

The ip max-route-entriescommand exists for compatibility with Avaya™ P550. There is no limitation on the size of the routing table, except for the amount of available memory.

Use the no ip max-route-entriescommand to remove the limitation.

The syntax for this command is:

[no] ip max-route-entries <value>

value

number of entries

Example:

Router-1(configure)#ip max-route-entries 4000

ip netbios-rebroadcast

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode.

Use the ip netbios-rebroadcastcommand to set the NETBIOS rebroadcasts mode on an interface.

Use the no ip netbios-rebroadcastcommand to disable NETBIOS rebroadcasts on an interface.

The syntax for this command is:

[no] ip netbios-rebroadcast <mode>

The possible values of mode are:

both

Netbios packets received on the interface

 

rebroadcasted to other interfaces and netbios packets

 

received on other interfaces are rebroadcasted into

 

this interface.

Avaya P460 Reference Guide

41

Page 51
Image 51
Cambridge SoundWorks P460 Ip max-route-entries, No ip max-route-entries value, Router-1configure#ip max-route-entries