10/100 Fast Ethernet Switch User’s Guide
Port Configuration
The port configuration menu allows you to change the port state in the case when you would like to partition a port due to excessive collision, or for observation, device repair, security reasons. Great caution, however, must be observed when partitioning a port; you should make sure that the partitioned port is not being used as the port to control or monitor the condition of other devices.
To change the configuration of a port:
1.Choose Port Configuration from the main menu.
2.Specify the port in the
3.In the Port State field, change the port state to enable or disable.
4.Choose SAVE and press Enter to let the changes take effect.
5.Choose EXIT and hit the enter key to leave the Port Configuration menu.
Figure 6-16. Port Configuration Menu
Port Status, Media Speed (10/100Mbps) and Duplex Mode reflect the current conditions of the port and are
50 | Using the Console Interface |