Gateway TWG870 user manual WEB Configuration

Chapter 2: WEB Configuration

Fig. 38

If you select WPS Method to PIN then it will ask for PIN while configuring the WiFi AP by showing a text box so, you need to enter PIN to establish the connection. You can get the PIN from your connected Wi-Fi client.

Fig. 39

￿PIN: Use this option to set the PIN, enter 4-8 digits PIN of the device you wish to configure. After entering the pin click “Add” button, then the WPS Setup AP page will appear as shown in Fig.38

Fig. 40

And WPS Configure Status will be “In progress”, after establishing the connection the WPS Configure Status will be “Success!” as shown below. After successful connection the client will get IP address from AP and then internet will be accessible.

59

Illustrations contained in this document are for representation only.