Gateway TWG870 WEB Configuration, Forcing end user to change the password, More information

Models: TWG870

1 90
Download 90 pages 55.29 Kb
Page 32
Image 32
3.Password

Chapter 2: WEB Configuration

Fig. 9

3.Password

Forcing end user to change the password

Upon access to the web pages on the CPE side of the router, if the user has not changed the default web password, a warning message must be displayed in the top banner of the web interface such as being visible while accessing any tabs.

This warning message informs the user that the default password must be changed:

Forcing end user to change the password In the second sentence, “here” is a hyperlink to the password setting page. Clicking on “here” lead to the display of the password setting page.

More information

By default, the username is empty (“”) and the password is “admin”.

This is set by different actions (non exhaustive list):

-at the manufactory level,

-following a reset factory on the modem,

-following a reset from the operator,

-following a change by the user who wants to come back to the default setting after using its own settings

When the current password is the default one, the user is strongly encouraged to change the default web password:

-Once the user logs in the web pages, the password setting page is displayed

-the warning message must be displayed in the top banner of the web interface

-The user can still access to all the web pages even if the password is not changed

-The warning message must be displayed on the top banner of each accessed Web page while the password is not changed

-The password warning message must be visible while accessing all tabs in a the same web page

28

Illustrations contained in this document are for representation only.

Page 32
Image 32
Gateway TWG870 user manual WEB Configuration, Forcing end user to change the password, More information, Password