Toshiba GN-1050 Enter the following items and press the NEXT, y EAP USER NAME, y EAP PASSWORD

1 SETTING UP WIRELESS NETWORK

3 Enter the following items and press the [NEXT].

y[EAP USER NAME]

Press this to enter the EAP user name that is used for the authentication.

In the EAP USER NAME, enter the user name in “User Name@FQDN” format.

Example: wlanuser@toshiba.com

y[EAP PASSWORD]

Press this to enter the EAP password that is used for the authentication.

y[RETYPE PASS]

Press this to enter the EAP password again that you enter in the EAP PASSWORD field.

When pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press the [OK] to set the entry.

4 Specify the following items and press the [NEXT].

yENCODING FORMAT

Select the encoding format of the CA certification file.

y[CA CERTIFICATE]

Press this to enter the file name of the CA certification file that you install in the equipment using TopAccess. If the specified certification file is not installed in the equipment, the error message to input correct file name will be displayed.

When pressing the [CA CERTIFICATE], the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press the [OK] to set the entry.

28 Setting Up the Infrastructure Mode