Toshiba GN-1050 Specify the following items and press the NEXT, y FULL AGREEMENT of SERVER NAME

1 SETTING UP WIRELESS NETWORK

5 Specify the following items and press the [NEXT].

yFULL AGREEMENT of SERVER NAME

Select the [ON] to confirm whether the RADIUS server name in the server certification file and the input RADIUS server name is same or not. When the [ON] button is selected, press the [RADIUS SERVER NAME] to enter the RADIUS server name.

In the RADIUS SERVER NAME, enter the user name in “Server Name@FQDN” format.

Example: wlanserver@toshiba.com

yENCRYPTION INTENSITY

Select the encryption intensity. When the PEAP protocol is selected, only [LOW] can be selected.

6 Specify the following items and press the [NEXT].

yENCRYPTION BETWEEN AP AND STA.

Select the encryption type that is used for the communication between Access Point and this equipment. [TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed interval.

[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES.

When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.

The encryption intensity between each encryption is:

AES(CCMP) > TKIP

Setting Up the Infrastructure Mode 29