Toshiba GN-1050 Specify the following items and press the NEXT, y TRANSMIT POWER, y TRANSMIT RATE

1 SETTING UP WIRELESS NETWORK

3 Specify the following items and press the [NEXT].

yTRANSMIT POWER

Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].

yTRANSMIT RATE

Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition. Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.

4 Confirm the settings and press the [FINISH].

The shutdown screen is displayed.

If you want to change the settings, press the [PREV] to move back to the screen that you want to change and then repeat the operation.

5 Press the [YES] to shutdown the equipment.

The wireless settings apply after restarting the equipment.

32 Setting Up the Infrastructure Mode