Toshiba GN-1050 Specify the following items and press the NEXT, y ENCRYPTION BETWEEN AP AND STA

Models: GN-1050

1 60
Download 60 pages 54.8 Kb
Page 27
Image 27
9 Specify the following items and press the [NEXT].

1 SETTING UP WIRELESS NETWORK

9 Specify the following items and press the [NEXT].

yENCRYPTION BETWEEN AP AND STA.

Select the encryption type that is used for the communication between Access Point and this equipment. [TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed interval.

[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES.

When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.

The encryption intensity between each encryption is:

AES(CCMP) > TKIP

10 Specify the following items and press the [NEXT].

yTRANSMIT POWER

Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].

yTRANSMIT RATE

Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition. Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.

Setting Up the Infrastructure Mode 25

Page 27
Image 27
Toshiba GN-1050 manual Specify the following items and press the NEXT, y ENCRYPTION BETWEEN AP AND STA, y TRANSMIT POWER