1 SETTING UP WIRELESS NETWORK
Specify SSID
When you select the Infrastructure Mode for the network type, you can specify the SSID by selecting the available network list or manually entering the SSID.
P.18 “Selecting the SSID from the available network list”
P.19 “Entering the SSID manually”
If you are not sure how the SSID must be specified, see the following section to determine the SSID. P.13 “Determine the SSID”
Selecting the SSID from the available network list
This equipment can search the available SSID automatically from the wireless network. Then you can select the SSID from the list.
1 Press the [AVAILABLE NETWORK].
The AVAILABLE NETWORK screen is displayed.
2 Select the SSID that this equipment will connect and press the [OK].
The screen returns to the SSID SETTINGS screen.
yThe available network may not displayed according to the communication environmental conditions.
yIf the desired SSID is not displayed, please specify the SSID manually.
P.19 “Entering the SSID manually”
yThis Wireless LAN supports only channel 1 to 11. This equipment cannot connect the Access Point that uses the other channel than these channels. Please make sure to set the channel between 1 to 11 in the Access Point.
18 Setting Up the Infrastructure Mode
