1 SETTING UP WIRELESS NETWORK
7 Specify the following items and press the [NEXT].
yTRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].
yTRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition. Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
8 Confirm the settings and press the [FINISH].
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and then repeat the operation.
9 Press the [YES] to shutdown the equipment.
The wireless settings apply after restarting the equipment.
30 Setting Up the Infrastructure Mode