1 SETTING UP WIRELESS NETWORK
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices. Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/ WPA2 or WPAPSK/WPA2PSK rather than WEP.
1 Press the [WEP] button and press the [NEXT].
The WIRELESS ENCRYPTION - WEP screen is displayed.
2 Enter the following items and press the [NEXT].
yWEP ENCRYPTION
Select the bit length of the WEP key.
yKEY ENTRY METHOD
Select the character code for the WEP key.
y[WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
| 64 bit | 128 bit | 152 bit |
HEX: | 10 | 26 | 32 |
ASCII: | 5 | 13 | 16 |
|
|
|
|
|
|
|
|
When pressing the [WEP], the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press the [OK] to set the entry.
Setting Up the Infrastructure Mode 33