Toshiba GN-1050 Select the transmit power and press the NEXT button, ‰ Selecting no security mode

1 SETTING UP WIRELESS NETWORK

‰Selecting no security mode

You can also set no security for wireless access.

If you do not set no security, anyone how knows the SSID can connect to the wireless network. Therefore, it is recommended to set the security if it is possible.

1 Press the [NONE] and press the [NEXT].

The TRANSMIT POWER and RATE SETTING screen is displayed.

2 Select the transmit power and press the [NEXT] button.

Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].

3 Confirm the settings and press the [FINISH] button.

The shutdown screen is displayed.

If you want to change the settings, press the [PREV] to move back to the screen that you want to change and then repeat the operation.

44 Setting up the Ad Hoc Mode