Quick Search Function
You can search for all Channels.
1Press and hold 
for at least 2 seconds in XM or SIRIUS mode to activate Quick Search mode.
2Turn the Rotary encoder to select the desired Channel within 10 seconds.
The selected Channel is received.
Receiving Weather or Traffic information from SAT Radio
1Press and hold 
/ 
for at least 2 seconds in the XM or SIRIUS mode.
The received weather or traffic channel is stored.
2Press and hold BAND for at least 2 seconds.
The stored Weather or Traffic channel will be recalled.
3Press and hold BAND for at least 2 seconds.
Returns to normal mode.
•Stored channels can also be recalled by pressing and holding BAND for at least 2 seconds, except when in XM or SIRIUS mode.
•The channel excluding the Weather or Traffic information can be stored and recalled.
Changing the Display
Text information, such as the channel name, artist name/feature, and song/program title, is available with each XM or Sirius channel. The unit can display this text information as explained below.
In XM or SIRIUS mode, press TITLE.
Each time you press this button, the display changes as shown below.
CHANNEL No. 
CATEGORY NAME 
CHANNEL NAME 
ARTIST NAME 
SONG TITLE 
COMPOSER NAME*1 
AUXILIARY DATA FIELD*2 
CLOCK 
CHANNEL No.
*1 SIRIUS mode only. *2 XM mode only:
When ADF is turned OFF, this information is not displayed (see “Setting the Auxiliary Data Field Display” on page 34).
•When the “Scroll Setting (TEXT SCROLL)” (page 25) is set to “SCROLL AUTO,” the display scrolls continuously.
When the Scroll Setting is set to “SCROLL MANUAL,” the display scrolls only once after any function is performed (PRESET, BAND, SEARCH, etc.).
Press and hold TITLE for more than 2 seconds to scroll the display manually.
•“CHANNEL No.” and “CLOCK” displays do not scroll.
•Depending on the model, the display may differ from the one shown above.
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or off. There is no ADF function for the SIRIUS receiver.
1Press MENU to select the SETUP mode, then press MODE.
2Select “XMADF” by pressing 
or 
, then press MODE.
3Select ON/OFF by turning the Rotary encoder.
When setting to ON, Auxiliary Data Field is displayed by pressing TITLE. (Refer to the “Changing the Display” section page 34.)
