Connecting to an External Amplifier
POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the
POWER IC OFF : Use this mode when the front and rear pre- amplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit’s internal amplifier has no output to drive speakers.
Front
left
Amplifier
Front right
Rear
left
Amplifier
Rear right
POWER IC ON : The speakers are driven by the
DVD Setup
ENT.
RETURN
Numeric
keypad (0 to 9)
CLR
SETUP
Speakers
SPEAKER
RIGHT FRONTFront right
SPEAKER
RIGHT REARRear right
SPEAKER
LEFT REARRear left
SPEAKER
LEFT FRONTFront left
•No sound is produced by the system when the power output is set to OFF.
•If an external amplifier only for the subwoofer is connected, set to ON.
Setting the Digital Output
OPT OUT ON / OPT OUT OFF (Initial setting)
To connect to a digitally to an audio processor, the optical digital output must be turned ON.
•If DVD Audio is used, sound is output via
DVD Setup Operation
•DVD Setup Operation is performed by the remote control unit.
The following 4 steps are common to each of the DVD settings. Refer to the specific section for details.
1Press SETUP before inserting a disc, or when in stop mode.
The setup menu appears on the monitor.
S E T U P
L A | N G U A G E S |
|
|
T V S C R E E N | 1 6 | 9 W I D E | |
P A R E N T A L | O F F | E N | |
A U D I O S E T U P |
|
| |
C U S T O M S E T U P |
|
| |
2Press 
or 
to select your desired setting item, then press ENT.
Further items will be displayed.
Setting items:
LANGUAGES / TV SCREEN / PARENTAL / AUDIO SETUP*1 / CUSTOM SETUP*2
*1 Refer to “Audio Setup” on page 29. *2 Refer to “Custom Setup” on page 31.
3Press 
, 
, 
or 
to change the setting, then press ENT.
