Indication for DVD/Video CD Player
(Audio display)
(Monitor display)
•Mechanism error.
1)Press 
and eject the disc.
If the disc does not eject, press 
again for at least 2 seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press 
again.
If the error indication still does not turn off after pressing 
a few times, consult your Alpine dealer.
(Audio display)
(Monitor display)
•No disc is inserted.
-Insert a disc.
•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
-Remove the disc by following step:
Press 
again for at least 2 seconds.
(Audio display)
(Monitor display)
•Protective circuit is activated at high temperature.
-The indicator will disappear when the temperature returns to within operation range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
(Audio display)
(Monitor display)
•Mechanism error.
1)Press 
and eject the disc.
If the disc does not eject, press 
again for at least 2 seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press 
again.
If the error indication still does not turn off after pressing 
a few times, consult your Alpine dealer.
(Monitor display)
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
(Audio display)
(Monitor display)
•Disc does not match regional code number.
- Load a disc that matches the regional code number.
Indication for Changer
•Protective circuit is activated due to high temperature.
-The indication will disappear when the temperature returns to normal operating range.
•Malfunction in the Changer.
-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.
