Setting the Speakers

1Check that Defeat mode is off (page 21).

2Press and hold MUTE for at least 2 seconds.

The audio processor control mode is activated.

3Select the SP SELECT mode by pressing MUTE repeatedly.

4Press MODE to select the speaker.

5Select any kind of speaker or set speaker to ON/OFF by turning the Rotary encoder.

FRONT1:

OFF/TW (Tweeter)/FULL (Full Range)

FRONT2:

OFF/ON

REAR:

OFF/ON

CENTER:

OFF/ON

SUBWOOFER:

OFF/MONO/STEREO

6Repeat steps 4 and 5 to set all the speakers.

7When the setting is complete, press and hold MUTE for at least 2 seconds.

The unit returns to the normal mode.

Set the speaker which is not connected to OFF.

Settings above can be carried out even when the speaker is set to OFF in “Speaker Setup” (page 40).

To use the subwoofer in MONO with PXA-H700 or PXA-H701 connected, connect the subwoofer to the subwoofer output terminal of PXA-H700 or PXA-H701.

Set MX Mode of the External Audio Processor

Before performing the operations below, set MX (Media Xpander) mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.

1Check that Defeat mode is off (page 21).

2Press and hold MUTE for at least 2 seconds.

The MX mode of the audio processor control mode is activated.

3Select ON/OFF of MX by pressing or .

If ON is selected, press MODE.

OFF: Turns off the MX effect of every music source.

ON: Turns on the specified MX mode.

4After setting to ON, select the desired MX level by turning the Rotary encoder.

Music source (such as radio broadcasts and CDs, excluding AM radio) level can be set.

MX CD (OFF, CD MX 1 to 3)

CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity.

MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3)

This corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original.

MX FM (OFF, FM MX 1 to 3)

The medium to high frequencies become more clear, and produces well balanced sound in all the bands.

MX DVD (OFF, MOVIE MX 1 to 2)

The dialog portion of the video is reproduced more clearly.

(DVD MUSIC)

This disk contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.

MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)

Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds to the media connected.

5When the setting is complete, press and hold MUTE for at least 2 seconds.

The unit returns to the normal mode.

The contents of MX set here is reflected to PXA-H700 or PXA-H701.

When OFF is selected, MX effect of each MX mode will be OFF.

Each music source, such as radio, CD, and MP3 can have its own MX setting.

There is no MX mode for AM radio.

MX COMPRESS MEDIA is applied for MP3/WMA, MMD.

36-EN

Page 38
Image 38
Alpine DVA-9861 owner manual Setting the Speakers, Set MX Mode of the External Audio Processor, 36-EN