Toshiba GN-1050 manual ‰ Selecting WPA/WPA2 security mode with PEAP protocol, Setting PMK cache

Models: GN-1050

1 60
Download 60 pages 54.8 Kb
Page 29
Image 29
‰Selecting WPA/WPA2 security mode with PEAP protocol

1 SETTING UP WIRELESS NETWORK

‰Selecting WPA/WPA2 security mode with PEAP protocol

Using the WPA/WPA2 with the PEAP protocol, you must install the CA certification file in the equipment. This equipment uses the user name and password to authenticate the access rights to the wireless network, and the RADIUS server authenticate this equipment using the CA certification file.

When using the WPA/WPA2 with the PEAP protocol, you must install the CA certification file in the equipment using TopAccess first. For instructions on how to install the CA certification using TopAccess, refer to TopAccess Guide.

1 Press the [WPA] or [WPA2] and press the [NEXT].

The AUTHENTICATION SETTINGS screen is displayed.

When the [WPA] or [WPA2] is selected, TKIP or AES(CCMP) can be selected.

2 Press the [PEAP] and press the [NEXT].

The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed.

Setting PMK cache

When the [WPA2] is selected in step 1, the PMK cache can be switched to ON or OFF. When the [WPA] is selected, the item for setting PMK cache is not displayed.

Setting Up the Infrastructure Mode 27

Page 29
Image 29
Toshiba GN-1050 manual ‰ Selecting WPA/WPA2 security mode with PEAP protocol, Press the PEAP and press the NEXT