8.2 Setting mode call and basics
<CAMERA SETUP>
Press the SELECT switch down about 2 seconds then menu will appear on the display.
Use the 
buttons to select <CAMERA SETUP>.
8-2-1. D/N MODE (DAY/NIGHT MODE)
<CAMERA SETUP> <PRIVACY ZONE> <CAMERA ID>
EXIT CANCEL DEFAULT
Selections: |
| D/N MODE | AUTO | |
AUTO (default): The camera will sense the brightness | ||||
D/N LEVEL | LOW | |||
| level and switches to color mode or | |||
| SHUTTER | IRIS | ||
| monochrome mode. | |||
| GAIN | STD | ||
COLOR: | Color mode | |||
SYNC | INT | |||
B/W: | Monochrome mode | |||
BLC | OFF | |||
|
| |||
Process: |
| SHARPNESS | MID | |
| WB | AUTO | ||
1. Position the cursor ( ) next to CAMERA SETUP | <OPTION> |
| ||
and press the SELECT switch to access the | BACK |
| ||
camera menu. |
|
| ||
2.Position the cursor (
) next to D/N MODE and press the SELECT switch to access menu.
3.Use the 
buttons to select AUTO, COLOR or B/W.
4.Press the SELECT switch to accept the selection.
- 13 -
