HP 445 Tftp Access, How To Use the ‘‘Hotkeys’’, To display the hotkey menu Type the forward slash

How To Use Quick Remote

Operating Notes

Operating Notes

TFTP Access

TFTP Client field

Figure 8-5. Example of a Quick Remote Screen With TFTP Client Field

TFTP access enables you to automatically configure a remote router to accept a configuration file via TFTP PUT from a specific IP address. That is, if the ‘‘TFTP Client IP Address’’ field contains an address, then the remote router that downloads the Quick Remote configuration containing that address will subsequently accept a TFTP PUT of a configuration file from that address. But if no address is provided in a Quick Remote configuration, then the remote router that downloads that configuration will not accept a TFTP PUT request.

How To Use the ‘‘Hotkeys’’

The hotkeys in Quick Remote let you control display features or exit from Quick Remote, and operate in the same way as the numeric hotkeys described in chapter 3, ‘‘How To Use Quick Configuration’’.

For further information, refer to ‘‘The Numeric Hotkeys’’ on page 3-13.

To display the hotkey menu: Type the forward slash (/).

8-14