HP 445 manual Hotkey Assignments

How To Use Quick Configuration

How To Configure for X.25

2.Type / . You will then see the hotkey menu. For example, with an

X.25 circuit type of PDN, you will see the following menu:

Figure 3-20. Hotkey Assignments

The ‘‘L’’ and ‘‘R’’ options access parameters you need to provide for minimal X.25 operation (described in the procedure to configure for minimal X.25 operation—page 3-18). The remaining options (listed below) give you access to default parameters you can change as required for non-minimal X.25 (and other) configurations:

∙E Edit virtual circuit parms (DDN only)

∙X Edit other X.25 parms

∙C Edit circuit parms

∙M Main configuration menu

3.Type the letter for the option you want. You will then see the corre- sponding Configuration Editor screen. After you have entered your changes, press [Return] as many times as necessary to return to the Quick Configuration screen.

4.Press the [Ctrl] [C] key combination to display the ‘‘save and exit’’ prompt:

Save configuration and exit Quick Configuration (y/n?)

3
Configuration	Quick

3-25