HP 445 manual Removed Ports for which a Configuration Exists

How To Use Quick Configuration

Operating Notes

To Use Quick Configuration To Delete the Non-Existent Ports from the Configuration:

1.Move the cursor to any row occupied by one of these ports. The Help window will then display the messages indicated below:

Cursor positioned in any configured row for

which the interface module has been removed

Help message indicating port configurations for which there is no hardware present

Figure 3-23. Removed Ports for which a Configuration Exists

2.Press the [Ctrl] [D] key combination to delete the configuration for the nonexistent interface module. You will then be prompted with the message

Are you sure you want to delete the old configura- tions for this empty slot?

3.Type y and press [Return] to delete the configuration for the empty slot.

Notice that the highlighted port labels for the deleted ports will remain in the Quick Configuration screen until you save the new configuration and exit from the Quick Configuration utility (described in the following steps).

3-34