HP 445 manual Save configuration and exit Quick Configuration y/n?, Reboot now y/n?

How To Use Quick Configuration

How To Configure for X.25

Save configuration and exit Quick Configuration (y/n?)

5.Type y and press [Return] to display the ‘‘reboot’’ prompt

Reboot now (y/n?)

6.Type y (for ‘‘yes’’) and press [Return].

While the router is rebooting, the console displays

REBOOTING THE SYSTEM

When you see the message

Waiting for speed sense

the router has finished rebooting. Any configuration changes you made prior to exiting and rebooting will be implemented in the router configuration.

7.Press [Return] to return to the Main menu.

To configure additional (non-minimal) X.25 parameters:

As you may have noticed in the procedure to configure for minimal X.25 operation (page 3-18), the ‘‘l’’ and ‘‘r’’ hotkeys give you access to several parameters other than those needed for minimal X.25 operation. Also, there are other hot keys that give you access to additional parameters that you may want to view and change. Thus, after you specify X.25 service and the circuit type (DDN, PDN, or PTOP), you can use the hotkeys to access, view, and change the current settings of all X.25 (or other) parameters if you find it necessary to do so.

1. Highlight the X.25 circuit type for the desired port. For example:

3
Configuration	Quick

3-23