HP 445 manual Fget X.X.X.X operator filename, NCL 7 Commands

How To Use the Network Control Language (NCL) Commands To Manage a Router

Using TFTP To Transfer Operating Code, Configuration, and NCL Display

has parameters and thus includes a space, then enclose the com- mand string in double quotes.

filename is the name of the configuration or operating code file on the remote host. On an HP Router CR, it can also be the name of the configuration file.

x.x.x.x is the IP address of the remote host.

Command	Function
fget X.X.X.X operator filename	Initiate a TFTP read request from a specific host or
	router for the configuration or operating system.
	Note: Fget does not use NCL-command.
fput X.X.X.X NCL-command filename	Initiate a TFTP write request to a specific host or to
	an HP Router CR for the configuration or operating
	system or display command output.

NCL 7 Commands

7-31