Transition Networks SISGM1040-244 user manual Commands Level

Transition Networks SISGM1040-244

CLI command interface

The following table lists the CLI commands and description.

Commands Level

	Modes	Access	Prompt	Exit	About This Mode1
		Method		Method
					The user commands
					available at the user
					level are a subset of
		Begin a		Enter logout	those available at the
	User EXEC	session with	switch>		privileged level.
				or quit.
		your switch.			Use this mode to
					• Perform basic tests.
					•Displays system
					information.
					The privileged
		Enter the			command is advance
	Privileged	enable		Enter	mode
		command	switch#	disable to	Privileged this mode to
	EXEC
		while in user		exit.	•Displays advance
		EXEC mode.			function status
					• Save configures
		Enter the		To exit to
		configure			Use this mode to
				privileged
	Global	command	switch		configure parameters
				EXEC
	Configuration	while in	(config)#		that apply to your
				mode, enter
		privileged			switch as a whole.
				exit or end
		EXEC mode.
	VLAN	Enter the vlan	switch	To exit to	Use this mode to
	database	database	(vlan)#	user EXEC	configure
24-Hour Technical Support: 1-800-260-1312				International: 00-1-952-941-7600