Policy CLI Commands

traceroute

Use the traceroute command as a trace route utility.

Syntax

traceroute <host>

Parameters

host

The IP address.

Example

X330WAN-2DS1-1(super)#traceroute 192.168.50.13

Policy CLI Commands

This section contains a list of all Policy-related CLI commands.

ip access-default-action

Use the ip access-default-actioncommand to set the default action for a specific Policy list.

Syntax

ip access-default-action<policy-list-number> <default-action>

Parameters

policy-list-numberAn integer from 100 to 149, where 0 is the default list.

default-actiondefault-action-denydefault-action-permit

Example

X330WAN-2DS1-1(super)#ip access-default-action 101 default-action- deny

ip access-group (Interface context)

Use the ip access-groupcommand to activate a specific Policy list and direction. The no form of this command suspends the Policy list.

Note: This command is executed from the Serial, Loopback, Fast Ethernet, and FabricFastEthernet interfaces.

Avaya X330WAN User’s Guide

209

Page 231
Image 231
Avaya X330WAN manual Policy CLI Commands, Traceroute, Ip access-default-action, Ip access-group Interface context