Avaya manual Speed, X330WAN-2DS1-1super#ip default-gateway Serial

VoIP Implementation with DEFINITY (CLAN and Prowler)

X330WAN-2DS1-1(super)#ip access-list-dscp trust 100 trust-cos-dscp(3)

•Activating the Policy List on the FabricFastEthernet interface:

X330WAN-2DS1-1(super)# interface FabricFastEthernet 1 X330WAN-2DS1-1(super-if:FabricFastEthernet1)# ip access-group 100 in X330WAN-2DS1-1(super-if:FabricFastEthernet1)# exit

•Serial interface configuration:

X330WAN-2DS1-1(super)# controller t1 1 X330WAN-2DS1-1(super-controller:1)# linecode b8zs X330WAN-2DS1-1(super-controller:1)# framing esf X330WAN-2DS1-1(super-controller:1)# channel-group 1 timeslots 1-24

speed 64

X330WAN-2DS1-1(super-controller:1)# exit X330WAN-2DS1-1(super)# interface Serial 1:1 X330WAN-2DS1-1(super-if:Serial1:1)# ip address 192.168.2.6 30 X330WAN-2DS1-1(super-if:Serial1:1)# mtu 300

Note: Some LAN data applications do not support fragmented packets. In this case, do not change the MTU from its default of 1500.

•VoIP configuration:

X330WAN-2DS1-1(super-if:Serial1:1)# voip-queueX330WAN-2DS1-1(super-if:Serial1:1)# ip rtp header-compressionX330WAN-2DS1-1(super-if:Serial1:1)# ip rtp port-range 2048 3028 X330WAN-2DS1-1(super-if:Serial1:1)# queue-limit 1 144 X330WAN-2DS1-1(super-if:Serial1:1)# exit

(4)

(5)

•Static routes configuration:

X330WAN-2DS1-1(super)#ip default-gateway Serial 1:1

•DHCP configuration:

X330WAN-2DS1-1(super)# ip bootp-dhcp relay

*Description of footnoted commands (also applies to identical stages in configuring Site B):

(1)At this stage you apply Priority 7 to Voice Control traffic.

(2)At this stage you apply Priority 6 to RTP traffic.

(3)At this stage you apply maximum trust between 802.1p priority and DSCP.

(4)At this stage you are matching the RTP port range used for RTP compression, to that of the CLAN.

(5)At this stage the default queue size is 60, and since cRTP is enabled you can increase the VoIP queue size.

Avaya X330WAN User’s Guide 75