Avaya manual Interface Serial X330WAN-2USP, Interface Serial 13.1 point-to-point

Interface Serial CLI Commands

Example

To enter interface serial mode port 1, channel group 3 in ip-interface 1:

X330W-2DS1(configure)# interface Serial 1:3

IP interface for PPP encapsulation:

interface Serial 1:3.1

Sub interface for frame-relay encapsulation:

interface Serial 1:3.1 point-to-point

IP interface for frame-relay encapsulation:

interface Serial 1:3.1.1

interface Serial (X330WAN-2USP)

Use the interface Serial command to create and/or enter interface Serial context. For LAN interfaces, use this command to create the interface. The no form of this command deletes an IP interface.

Syntax

[no] interface Serial <if-number>[<if-link-type>]

Parameters

if-number	Comprised of: port[.ip-interfacesub-interface[.ip-
	interface]].
port	The controller number (port number) for this serial port. For
	the X330W-2DS1, this value is either 1 or 2.
sub-interface	The Sub-interface number. An integer from 0 to 1024.
ip-interface	The IP interface number within this interface (as a number of
	IP interfaces might be bound to a Layer 3 interface). An integer
	from 0 to 1024.
if-link-type	Point-to-point.

Example

To enter interface serial mode port 1:

X330W-2USP(super)# interface Serial 1

IP interface for PPP encapsulation:

interface Serial 1.1

Sub interface for frame-relay encapsulation:

interface Serial 1.1 point-to-point

IP interface for frame-relay encapsulation:

interface Serial 1.1.1

Avaya X330WAN User’s Guide 133