Chapter 4 Operational Concepts and Configuration Examples
X330WAN-2USP-1(super)# map-class frame-relay data
cir out 0 | (3) | |
|
fragment | (5) | |
| ||
exit |
|
•Serial interface configuration:
•Frame relay sub interface configuration:
group 16 17 (6)
voip (7)
data (8)
•Default gateway configuration:
X330WAN-2USP-1(super)# ip default-gateway serial 1.1
*Description of footnoted commands (also applies to identical stages in configuring Site B):
(1) This value depends on the number of phones used (approx. 26Kbps per phone).
(2) This value is usually 1/8 of the CIR, in this configuration example Tc = 125msec.
(3) At this stage you configure no CIR for data traffic.
(4) At this stage, since CIR = 0 all of the bandwidth for data traffic is EIR.
(5)At this stage you configure to fragment data packets to prevent long data packets from delaying voice packets.
(6)At this stage you assign DLCI 16 to high priority traffic, and DLCI 17 to all remaining traffic.
(7)At this stage you assign
(8)At this stage you assign
70 | Avaya X330WAN User’s Guide |