Frame Relay Configuration CLI Commands

fragment (Map-class context)

Use the fragment command to set the fragment size. If you do not enter a value, the default value is used. The no form of this command restores the default value.

Syntax

[no] fragment <value>

Parameters

value The fragment size in bytes. The default is 88 bytes.

Example

X330WAN-2USP-1(super-map-class)# fragment 35

frame-relay class-dlci (Serial sub-interface context)

Use the frame-relayclass-dlcicommand to define a map-class to a DLCI on a sub-interface. The no form of this command deletes the map-class of a DLCI on the sub-interface.

Syntax

[no] frame-relayclass-dlci<DLCI number> <map-class-name>

Parameters

DLCI number The DLCI number to assign a map-class, an integer from 16 to 1007.

map-class-nameThe DLCI map-class name, a string of characters.

Example

X330W-2USP-1(super-if:Serial2.1)# frame-relayclass-dlci 16 voip

frame-relay interface-dlci (Serial sub-interface context)

Use the frame-relayinterface-dlcicommand to define the Primary DLCI on a sub-interface. The no form of this command deletes the Primary DLCI on the sub-interface.

Syntax

[no] frame-relay interface-dlci <DLCI number>

Avaya X330WAN User’s Guide

143

Page 165
Image 165
Avaya X330WAN manual Fragment Map-class context, Frame-relay class-dlci Serial sub-interface context, No fragment value