Avaya X330WAN manual Copy tftp EWarchive, Copy tftp startup-config filename ip

Chapter 6 X330WAN CLI Commands

copy tftp startup-config

Use the copy tftp startup-configcommand to copy the device configuration from the saved TFTP file to the NVRAM Startup Configuration NVRAM.

Note: Before downloading the Startup Configuration file to a X330W-2DS1 module, verify that the current DS mode of the module (E1 or T1) is the same as the DS mode in the Startup Configuration file you are about to download. If necessary, change the X330W-2DS1’s DS mode using the ds-modecommand, prior to downloading.

Syntax

copy tftp startup-config <filename> <ip>

Parameters
filename	The file name (full path).
ip	The IP address of the host.

Example

X330WAN-2DS1-1(configure)# copy tftp startup-config

c:\p332\router1.cfg 192.168.49.10

copy tftp EW_archive

Use the copy tftp EW_archive command to download the WAN Device Manager application into the device via TFTP. To use this command, you must have an active TFTP server. If Avaya MultiService Network Manager is running, an additional TFTP server is not required.

Syntax

copy tftp EW_archive <filename> <ip>

Parameters

filename	Embedded Web Manager image file name (full path).
ip	The IP address of the TFTP server.

Example

X330WAN-2DS1-1(configure)#copy tftp EW_archive c:\p330\p330web201 192.168.49.10 5

92 Avaya X330WAN User’s Guide