Avaya X330WAN manual Remote Controller context, Show controllers port

Controller CLI Commands (X330WAN-2DS1 Only)

remote (Controller context)

Use the remote command to reset the far-end counters.

Note:

1.This command can only be performed if the controller is set to T1.

2.This command is used only when the fdl at&t option is defined.

Syntax

remote <fdl-request-type>

Parameters

fdl-request-type Reset Performance Monitoring Counters Reset Errored ESF Data

Example

X330WAN-2DS1-1(super)#remote Reset-errored-ESF-data

show controllers

Use the show controllers command to display the status of the controller.

Syntax

show controllers [<port>]

Parameters

portThe port number.

Output Example for E1

X330WAN-2DS1-1(configure)# show controllers

E1 1 is up.

No alarms detected.

Framing is CRC4, Line Code is HDB3, Clock Source is

Line.

channel-group 1 timeslots 1-31

Data in current interval (778 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err

Secs, 0 Unavail Secs

Avaya X330WAN User’s Guide 125