Cisco Systems MDS 9000 20-163, Examples, Show Commands show system, switch# show system health

Chapter 20 Show Commands

show system

Examples	The following example displays the system redundancy status.
	switch# show system redundancy status
	Redundancy mode
	---------------
	administrative:	HA
	operational:	None
	This supervisor (sup-2)
	-----------------------
	Redundancy state:	Active
	Supervisor state:	Active
	Internal state:	Active with no standby
	Other supervisor (sup-1)
	------------------------
	Redundancy state:	Not present

The following example displays the default switch port states.

switch# show system default switchport

System default port state is down

System default trunk mode is on

The following example displays error information for a specified ID.

switch# show system error-id 0x401D0019

Error Facility: module

Error Description: Failed to stop Linecard Async Notification.

The following example displays the system health information.

switch# show system health

System Health Services iteration frequency 5 seconds

Active SUP arbiter is Working

Active SUP bootflash is Working

The following example displays the system reset information.

switch# show system reset reason

----- reset reason for module 6 -----

1)At 520267 usecs after Tue Aug 5 16:06:24 1980 Reason: Reset Requested by CLI command reload Service:

Version: 1.2(0.73a)

2)At 653268 usecs after Tue Aug 5 15:35:24 1980 Reason: Reset Requested by CLI command reload Service:

Version: 1.2(0.45c)

3)No time

Reason: Unknown Service:

Version: 1.2(0.45c)

4) At 415855 usecs after Sat Aug 2 22:42:43 1980

Reason: Power down triggered due to major temperature alarm Service:

Version: 1.2(0.45c)

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-163