Cisco Systems MDS 9000 manual show ips arp interface gigabitethernet slot/port, 20-88

Chapter 20 Show Commands

show ips arp

show ips arp

To display the IP storage ARP cache informaiton , use the show ips arp command.

show ips arp interface gigabitethernet slot/port

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

interface gigabitethernet slot/port Specifies a Gigabit Ethernet interface by the slot and port.

None.

EXEC

This command was introduced in Cisco MDS SAN-OS Release 1.1(1).

Use the show ips arp interface gigabitethernet command to display the ARP cache on the Gigabit Ethernet interfaces. This command takes the main Ethernet interface and as a parameter and returns the ARP cache for that interface.

The following example displays ARP caches in the specified interface.

switch# show ips arp interface gigabitethernet 4/1
Protocol	Address	Age (min)		Hardware Addr	Type	Interface
Protocol	Address	Age (min)		Hardware Addr	Type	Interface
Internet	172.22.91.1	2	-	00:00:0c:07:ac:01	ARPA	GigabitEthernet4/4
Internet	172.22.91.2	0	-	00:02:7e:6b:a8:08	ARPA	GigabitEthernet4/4
Internet	172.22.91.17	0	-	00:e0:81:20:45:f5	ARPA	GigabitEthernet4/4
Internet	172.22.91.18	0	-	00:e0:81:05:f7:64	ARPA	GigabitEthernet4/4
Internet	172.22.91.30	0	-	00:e0:18:2e:9d:19	ARPA	GigabitEthernet4/4
...

	Cisco MDS 9000 Family Command Reference
20-88	78-16088-01, Cisco MDS SAN-OS Release 1.3