Cisco Systems MDS 9000 manual show fc-tunnel explicit-path name tunnel-id-map, 20-26

Chapter 20 Show Commands

show fc-tunnel

show fc-tunnel

To display configured Fibre Channel tunnel information, use the show fc-tunnelcommand.

show fc-tunnel [explicit-path [name] tunnel-id-map]

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

explicit-path	Displays all configured explicit paths.
name	Specifies the explicit path name. Maximum length is 16 characters.
tunnel-id-map	Displays the mapping information for the outgoing interface.
None.
EXEC mode.

This command was introduced in Cisco MDS SAN-OS Release 1.2(1).

Multiple tunnel IDs can terminate at the same interface.

The following example displays the FC tunnel status

switch# show fc-tunnel

fc-tunnel is enabled

The following example displays the FC tunnel egress mapping information.

switch# show fc-tunnel tunnel-id-map

tunnel id egress interface

150fc3/1

100 fc3/1

The following example displays explicit mapping information of the FC tunnel.

switch# show fc-tunnel explicit-path Explicit path name: Alternate1

10.20.1.2loose

10.20.1.3strict

Explicit path name: User2

10.20.50.1strict

10.20.50.4loose

	Cisco MDS 9000 Family Command Reference
20-26	78-16088-01, Cisco MDS SAN-OS Release 1.3