Cisco Systems MDS 9000 manual show fdmi, hba-id, 20-54, database, detail, vsan vsan-id, Defaults

Chapter 20 Show Commands

show fdmi

show fdmi

To display the Fabric-Device Management Interface (FDMI) database information, use the show fdmi command.

				show fdmi database [detail [hba-id [hba-idvsan vsan-idvsan vsan-id] vsan vsan-id]
Syntax Description				fdmi	Accesses the FDMI commands.
				database	Displays the FDMI database contents.
				detail	Specifies detailed FDMI information.
				hba-id	Displays detailed information for the specified HBA entry.
				hba-id	Displays detailed information for the specified HBA entry.
				vsan vsan-id	Specifies FDMI information for the specified VSAN ranging from 1 to 4093.
Defaults				None.
Command Modes				EXEC mode.
Command History				This command was introduced in Cisco MDS SAN-OS Release 1.3(1).
Usage Guidelines				None.
Examples				The following example displays all HBA management servers.
				switch# show fdmi database
				Registered HBA List for VSAN 1
				10:00:00:00:c9:32:8d:77
				21:01:00:e0:8b:2a:f6:54
				switch# show fdmi database detail
				Registered HBA List for VSAN 1
			-------------------------------
				HBA-ID: 10:00:00:00:c9:32:8d:77
			-------------------------------
				Node Name	:20:00:00:00:c9:32:8d:77
				Manufacturer	:Emulex Corporation
				Serial Num	:0000c9328d77
				Model	:LP9002
				Model Description:Emulex LightPulse LP9002 2 Gigabit PCI Fibre Channel Adapter
				Hardware Ver	:2002606D
				Driver Ver	:SLI-2 SW_DATE:Feb 27 2003, v5-2.20a12
				ROM Ver	:3.11A0
				Firmware Ver	:3.90A7
				OS Name/Ver	:Window 2000
				CT Payload Len	:1300000
				Port-id: 10:00:00:00:c9:32:8d:77
			-------------------------------
		Cisco MDS 9000 Family Command Reference
	20-54				78-16088-01, Cisco MDS SAN-OS Release 1.3