Cisco Systems MDS 9000 show system health, module slot timelog timelog module slot, loopback

Chapter 20 Show Commands

show system health

show system health

To display configured Online System Health Management (OSHM) information, use the show system health command.

show system health [module slot statistics [loopback [interface {fc slot/portiscsi slot/port}

		module slot [timelog] timelog] module slot]
Syntax Description		module slot	Displays information for a module in the switch,
		statistics	Displays OHMS statistics.
		interface	Specifies the required interface.
		fc slot/port	Specifies the Fiber Channel interface at the specified slot and port.
		iscsi slot/port	Specifies the iSCSI interface at the specified slot and port.
		loopback	Displays the OHMS loopback test statistics.
		timelog	Displays the loopback round trip times.
Defaults		None
Command Modes		EXEC mode
Command History		This command was introduced in Cisco MDS SAN-OS Release 1.3(4).
Usage Guidelines		None.
Examples		The following example displays the current health of all modules in the switch.
		switch# show system health
		Current health information for module 2.
		Test		Frequency	Status	Action
	-----------------------------------------------------------------
		Bootflash	5	Sec	Running	Enabled
		EOBC	5	Sec	Running	Enabled
		Loopback	5	Sec	Running	Enabled
	-----------------------------------------------------------------
		Current health information for module 6.
		Test		Frequency	Status	Action
	-----------------------------------------------------------------
		InBand	5	Sec	Running	Enabled
		Bootflash	5	Sec	Running	Enabled
		EOBC	5	Sec	Running	Enabled
		Management Port	5	Sec	Running	Enabled

-----------------------------------------------------------------

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-165