Cisco Systems MDS 9000 show boot auto-copy list, 20-9, Defaults, Command Modes, Examples

Chapter 20 Show Commands

show boot auto-copy

show boot auto-copy

To display state of the auto-copy feature, use the show boot auto-copycommand.

show boot auto-copy [list]

Syntax Description	list	Displays the list of files to be auto-copied
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.2(1).
Usage Guidelines	None.
Examples	The following example displays the current state of the auto-copy feature.
	switch# show boot auto-copy
	Boot variables Auto-Copy ON

The following example displays the ilc1.bin image being copied to the standby supervisor module's bootflash, and once this is successful, the next file will be lasilc1.bin. This command only displays files on the active supervisor module.

switch# show boot auto-copy list File: /bootflash/ilc1.bin Bootvar: ilce

File:/bootflash/lasilc1.bin

Bootvar: lasilc

The following example displays a typical message when the auto-copy option is disabled or if no files are copied.

switch# show boot auto-copy list No file currently being auto-copied

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-9