Cisco Systems MDS 9000 manual show kernel core limit module slot target, 20-110

Chapter 20 Show Commands

show kernel core

show kernel core

To display kernel core configuration information, use the show kernel core command.

show kernel core {limit module slot target}

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

limit	Displays the configured line card limit.
module slot	Displays the kernel core configuration for a module in the specified slot.
target	Displays the configured target IP address.
None.
EXEC

This command was introduced in Cisco MDS SAN-OS Release 1.1(1).

None.

The following examples display kernel core settings.

switch# show kernel core limit 2

switch# show kernel core target 10.50.5.5

switch# show kernel core module 5 module 5 core is enabled

level is header

dst_ip is 10.50.5.5 src_port is 6671 dst_port is 6666 dump_dev_name is eth1

dst_mac_addr is 00:00:0C:07:AC:01

	Cisco MDS 9000 Family Command Reference
20-110	78-16088-01, Cisco MDS SAN-OS Release 1.3