Cisco Systems MDS 9000 show fcip profile profile-id all, 20-38, Usage Guidelines Examples

Chapter 20 Show Commands

show fcip profile

show fcip profile

To display the status of an interface at any time, usedisplays the show fcip profile command.

show fcip profile [profile-idall]

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

profile-id	Displays the information for the specified profile. The range is 1 to 255.
all	Displays detailed information for all profiles.

None.

EXEC

This command was introduced in Cisco MDS SAN-OS Release 1.1(1).

None.

The following example displays all FCIP profiles.

switch# show fcip profile

----------------------------------------------------

ProfileId IpaddrTcpPort

----------------------------------------------------

1	41.1.1.2	3225
2	10.10.100.154	3225
3	43.1.1.2	3225
4	44.1.1.100	3225
6	46.1.1.2	3225
7	47.1.1.2	3225

The following example displays information for a specified FCIP profile.

switch# show fcip profile 7 FCIP Profile 7

Internet Address is 47.1.1.2 (interface GigabitEthernet4/7) Listen Port is 3225

TCP parameters SACK is disabled

PMTU discovery is enabled, reset timeout is 3600 sec Keep alive is 60 sec

Minimum retransmission timeout is 300 ms Maximum number of re-transmissions is 4 Send buffer size is 0 KB

Maximum allowed bandwidth is 1000000 kbps Minimum available bandwidth is 15000 kbps Estimated round trip time is 1000 usec

	Cisco MDS 9000 Family Command Reference
20-38	78-16088-01, Cisco MDS SAN-OS Release 1.3