Cisco Systems MDS 9000 manual 20-74, Show Commands show install all impact

Chapter 20 Show Commands

show install all impact

[####################] 100% -- SUCCESS
Extracting “loader” version from image bootflash:/vk73a.
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module	bootable	Impact Install-type Reason
------	--------	-------------- ------------ ------
2	yes	non-disruptive	none
4	yes	non-disruptive	none
6	yes	non-disruptive	none
9	yes	non-disruptive	none
Images will be upgraded according to following table:
Module	Image	Running-Version	New-Version Upg-Required
------	----------	--------------------	--------------------	------------
2	slc	1.2(1)	1.2(1)	no
2	bios	v1.0.7(03/20/03)	v1.0.7(03/20/03)	no
4	slc	1.2(1)	1.2(1)	no
4	ilce	1.2(1)	1.2(1)	no
4	bios	v1.0.7(03/20/03)	v1.0.7(03/20/03)	no
6	system	1.2(1)	1.2(1)	no
6	kickstart	1.2(1)	1.2(1)	no
6	bios	v1.0.7(03/20/03)	v1.0.7(03/20/03)	no
6	loader	1.0(3a)	1.0(3a)	no
9	slc	1.2(1)	1.2(1)	no
9	bios	v1.0.7(03/20/03)	v1.0.7(03/20/03)	no

The following command displays the error message that is displayed if a wrong image is provided.

switch# show install all impact system bootflash:

Compatibility check failed. Return code 0x40930003 (Invalid bootvar specified in the input).

	Cisco MDS 9000 Family Command Reference
20-74	78-16088-01, Cisco MDS SAN-OS Release 1.3