Cisco Systems MDS 9000 manual show vrrp statistics vr group interface type, 20-183, Defaults

Chapter 20 Show Commands

show vrrp

show vrrp

To display the VRRP configuration information, use the show vrrp command.

show vrrp [statistics vr group [interface type]]

Syntax Description	statistics	Displays cumulative vrrp statistics for this machine.
	vr	Displays virtual router information.
	group	Specifies the group ID. The range is 1 to 255.
	interface type	Enter mgmt 0 for management interface, or VSAN for the IPFC VSAN
		interface.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines	None.
Examples	The following example displays VRRP configured information.
	switch# show vrrp vr 7 interface vsan 2 configuration
	vr id 7 configuration

admin state down priority 100

no authentication advertisement-Interval 1 preempt yes

tracking interface vsan1 priority 2 protocol IP

The following example displays VRRP status information.

switch# show vrrp vr 7 interface vsan 2 status vr id 7 status

MAC address 00:00:5e:00:01:07

Operational state: init

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-183