Cisco Systems MDS 9000 manual show iscsi virtual-target configured name, 20-103

Chapter 20 Show Commands

show iscsi virtual-target

show iscsi virtual-target

To display all the iSCSI nodes that are local to the switch, use the show iscsi virtual-targetcommand.

show iscsi virtual-target [configured] [name]

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

configured	Show the information for all iSCSI ports.
name	Show iSCSI information for the specified virtual-target.

None.

EXEC

This command was introduced in Cisco MDS SAN-OS Release 1.1(1).

If no parameter is provided the command lists all the active iSCSI virtual targets. If the iSCSI node name is provided then the command lists the details of that iSCSI virtual target.

The following example displays information on all the iSCSI virtual targets.

switch# show iscsi virtual-target target: abc1

Port WWN 21:00:00:20:37:a6:b0:bf Configured node

target: iqn.com.domainname.172.22.93.143.08-03.gw.22000020374b5247 Port WWN 22:00:00:20:37:4b:52:47 , VSAN 1

Auto-created node

...

target: iqn.com.domainname.172.22.93.143.08-03.gw.210000203739aa39 Port WWN 21:00:00:20:37:39:aa:39 , VSAN 1

Auto-created node

The following example displays a specified iSCSI virtual target.

switch# show iscsi virtual-target

iqn.com.domainname.172.22.93.143.08-03.gw.210000203739a95b

target: iqn.com.domainname.172.22.93.143.08-03.gw.210000203739a95b Port WWN 21:00:00:20:37:39:a9:5b , VSAN 1

Auto-created node

The following example displays the trespass status for a virtual target.

switch# show iscsi virtual-target iqn.abc target: abc

Port WWN 00:00:00:00:00:00:00:00 Configured node

all initiator permit is disabled trespass support is enabled S

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-103